Hi, I am planning to purchase a 2.5-inch HDD. If I connect it to my computer using a SATA to USB adapter instead of directly to the computer’s SATA, can it somehow affect the result of this scan?

I apologize for my ignorance but I couldn’t find an answer to this question anywhere

  • hendrik@lemmy.ml
    link
    fedilink
    English
    arrow-up
    6
    arrow-down
    1
    ·
    4 months ago

    Not under normal circumstances. I had some issues recovering damaged harddisks that had lots of errors and retries and sometimes either the USB adapter or the mainboard SATA would crap out or handle it better. But for normal copying of HDDs, both should copy the exact same data.

    • cooljimy84@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      1
      ·
      4 months ago

      I second this, when a drive shits the bed a sata controller handles it better, some times with a USB adapter you mess the whole bus up and need a reboot of the machine (from using them on windows experience)

    • just_another_person@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      4 months ago

      What you’re describing is data TRANSFER. Bad sector detection and management is done by the drive controller firmware.