luckily this is just a 32; i had a 70 from the same brand with the same INSANELY FUCKING STUPID STAND DESIGN that i had to find something for…literally at the most extreme edges of the thing, what the fuck is this? this is so fucking stupid, it cannot be meaningfully cheaper than a proper design and it looks fucking dumb as hell and surely this has pissed off 90% of people that wanted a TV and want to put it on a little stand like a normal fucking person right??

    • Vilian@lemmy.ca
      link
      fedilink
      English
      arrow-up
      49
      arrow-down
      20
      ·
      1 year ago

      they expect you to know the lengh of your own table that’s why they put the lengh on the site, also, the legs are already short, how OP expext the TV to be stable with it even shorter??

      • Mossy Feathers (She/They)@pawb.social
        link
        fedilink
        English
        arrow-up
        21
        arrow-down
        1
        ·
        1 year ago

        You can make a stable mount without legs as wide as the TV. I have two 27in, 1440p monitors, which both came with stands that were probably 30% as wide as the monitors themselves. However, the stands were weighted and primarily steel (I’m assuming it was steel anyway) with a plastic shell. A TV doesn’t need a wide base unless the company that made it is cheaping out and refuses to spend the money to make a weighted base.

        • Aux@lemmy.world
          link
          fedilink
          English
          arrow-up
          7
          arrow-down
          1
          ·
          1 year ago

          Your monitors are probably much more expensive than this TV.

      • WarmSoda
        link
        fedilink
        English
        arrow-up
        16
        arrow-down
        7
        ·
        1 year ago

        If my 75" TV can have a small center stand under it there’s no excuse for smaller tvs to have extra wide stands.

        • CmdrShepard@lemmy.one
          link
          fedilink
          English
          arrow-up
          34
          arrow-down
          6
          ·
          1 year ago

          This is like a $150 TV. They aren’t going to make a $50 solid steel base and internal frame for that over some cheap injection molded legs.

        • Tech With Jake
          link
          fedilink
          English
          arrow-up
          5
          ·
          1 year ago

          Bro… That TV is over 7 years old, meant for health centers, and probably weighs 2 - 3 times the TV in OOP.

          While yes, it is annoying, nothing modern has a center stand. https://www.google.com/search?q=tv with center stand

          It’s definitely a cost cutting feature and you definitely can’t expect a $200 TV to have a weighted center stand these days.

    • WarmSoda
      link
      fedilink
      English
      arrow-up
      16
      arrow-down
      35
      ·
      1 year ago

      I will never mount a TV on the wall. That shits annoying.

      • CmdrShepard@lemmy.one
        link
        fedilink
        English
        arrow-up
        14
        arrow-down
        4
        ·
        1 year ago

        How is it annoying? I try to wall mount every TV because then I can move it around or angle it easily and it looks 100x better than hanging halfway off a bedside table.

        • 🇰 🌀 🇱 🇦 🇳 🇦 🇰 ℹ️@yiffit.net
          link
          fedilink
          English
          arrow-up
          14
          arrow-down
          3
          ·
          edit-2
          1 year ago

          The annoying thing for me is that you have to plug them in and hiding the power cord from dangling down the wall to an outlet sucks, and the only other option is to wire it up through the wall, which is way more work.

          That and, again, the mount is sold separately for like 90% of TVs. Just include a basic one with the TV. It’s literally just a piece of machined metal.

        • WarmSoda
          link
          fedilink
          English
          arrow-up
          15
          arrow-down
          7
          ·
          edit-2
          1 year ago

          For me I hate the giant holes in my wall. Taking the mount down is a pain. Once it’s up you can’t move the TV anywhere else. Also, I hate tilting my head up just to see the TV.

          Edit. Apparently not hanging a TV is a criminal offense around here.

          • wrath_of_grunge@kbin.social
            link
            fedilink
            arrow-up
            13
            arrow-down
            4
            ·
            1 year ago

            if you’re making giant holes in your wall, you’re mounting wrong.

            most wall mounts are going to be two or three bolt holes into a stud. they should be about as big around as a sharpie. if you remove the mount, a small dab of spackle covers them.

            • EatYouWell@lemmy.world
              link
              fedilink
              English
              arrow-up
              4
              arrow-down
              3
              ·
              1 year ago

              I make big ass holes, but I use toggle bolts for anything heavy that doesn’t line up with the studs, and those need a 1/2" hole.

              • bobs_monkey
                link
                fedilink
                English
                arrow-up
                4
                ·
                edit-2
                1 year ago

                Never rely on toggle bolts to hand a tv, find the studs and use lag bolts

            • WarmSoda
              link
              fedilink
              English
              arrow-up
              3
              arrow-down
              12
              ·
              1 year ago

              Yeah I don’t want to spackle my walls, thanks.

            • WarmSoda
              link
              fedilink
              English
              arrow-up
              6
              arrow-down
              4
              ·
              1 year ago

              I tend to rearrange my livingroom more than once a lifetime.

          • Summzashi@lemmy.one
            link
            fedilink
            English
            arrow-up
            4
            arrow-down
            1
            ·
            1 year ago

            Do you realize you’re allowed to hang your tv at any height you desire? The police won’t arrest you if you just put your tv at eye level.

            • grue@lemmy.world
              link
              fedilink
              English
              arrow-up
              7
              ·
              1 year ago

              The police won’t arrest you if you just put your tv at eye level.

              Frankly, the crime should be if you put it at anything but eye level.

            • WarmSoda
              link
              fedilink
              English
              arrow-up
              4
              arrow-down
              2
              ·
              1 year ago

              Do you realize I simply do not want my TV hanging on a wall?

                • WarmSoda
                  link
                  fedilink
                  English
                  arrow-up
                  3
                  arrow-down
                  2
                  ·
                  1 year ago

                  I’m glad you care so much about my living room lol

                  • Summzashi@lemmy.one
                    link
                    fedilink
                    English
                    arrow-up
                    2
                    arrow-down
                    5
                    ·
                    edit-2
                    1 year ago

                    Maybe not post on the internet about issues you have if you’re not interested in people giving you advice. It’s clear you have a lot more issues in addition to not knowing how to hang a TV. Good luck in life.

        • Mossy Feathers (She/They)@pawb.social
          link
          fedilink
          English
          arrow-up
          9
          arrow-down
          4
          ·
          edit-2
          1 year ago

          You have to find the studs, drill holes, make sure you have screws that are long enough (I imagine most wall mounts come with these, but never tried to actually wall-mount a TV), make sure the mount is level, then attach the mount to the wall, then the TV to the mount. That’s if you don’t care about exposed cables, and if you ever plan on showing your room off, someone’s gonna point out the lack of cable management (hurrr… Why aren’t the cables hidden?).

          If you want to hide the cables too, then you have to cut holes in the wall, which means having some kind of saw. If you want the holes to look nice, then you need plates to go over the holes. Depending on the plates – whether they’re a basic, generic passthrough that you push cables through, or something more professional with actual sockets for dedicated inputs/outputs – you may need extra cables, one for each connection you’re wanting to route through the wall, plus extra cables to connect the plate behind the TV to the TV itself.

          Now, if you don’t want to diy it, then you could pay someone to do it which makes it a lot easier on you, but now you’re spending cash to have someone do an easy but annoying and time consuming job for you.

          • CmdrShepard@lemmy.one
            link
            fedilink
            English
            arrow-up
            4
            arrow-down
            3
            ·
            1 year ago

            This is mostly unnecessary. I just slap the wall mount up into the studs, hang the TV, and use a $7 cable concealer to hide the power cord. Dedicated outlets for power and video behind the TV is great but that’s more suited for rich people or electricians.