Hello!
Through work I was granted access to an HPE ProLiant DL360 Gen10 server to lab with, but I am struggling with configuring the iLO 5-port.
I have done thorough Googling and trying to find relevant information, but it feels like I am missing some kind of puzzle piece.
It is connected to the local office switch. The VMware ESXi-interface has its own IP-address assigned through DHCP and is working. I have been given my own vLAN (since it is sitting on company network) which the VMs are sitting on and they are working.
I have reset the iLO configuration to its default factory settings, set a custom Administrator password and an static IP-address. I have tried different browsers, found and tried the iLO Integrated Remote Console (no bueno), different static IP-adresses (eg. 1; 192.168.0.202, 255.255.255.0, 192.168.0.1. 2; 172.31.13.202, 255.255.255.0, 172.31.13.202. 3; 10.10.10.12, 255.255.255.0, 10.10.10.1.) Pinging times out. I have also tried enable DHCP, but it just says that IP-address is “Not available”.
It has its own dedicated iLO-port on the backside, Network Interface Adapter is set to “On”. I have also tried using fixed LOM and the vLAN which was given to me.
Do you guys have any idea what I might’ve missed?
You must log in or register to comment.
Could the Ilo have died? Was it known working before you took over the system? It’s rare but any tech can fail.
Do you have activity on the interface?