We live on a farm. There is one residential house with a hub inside. This has two Ethernet cables running underground to an office building and a portacabin in separate locations, which then connects to little hubs which extend the WiFi into those buildings.

We now want more WiFi to reach another area even further away. This is so we can run CCTV cameras. If it’s not possible we will have to get SIM card cameras and pay monthly.

But, before we do, what else can we do? I don’t think we should really be running anymore Ethernet cables off the existing hub elsewhere as, could it overload it? It just seems a lot for one residential hub.

Could we get openreach to do something?

Any ideas PLEASE throw them my way!

  • RagnarLunchbox@alien.top
    cake
    B
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    As long at you are under 100metres , just run cables. Run the outdoor Cat6a variety, or lay regualr in conduit, Dont run just one, run two (One for now and one for later/if something breaks.)

    You can buy other point to point wireless netwoking devices as suggested below, but these will all add more power use and complexity as they are a little specialised to get working well.

    Cat6a will allow you many years of cheap and reliable service and will be cheper in the long run unless you’ve got some really difficult terrain to work with.

    You could also run Multi Mode fibre optic cable up to 550m with 2 cheap swiches that have an SPF port at either end. This will cost a little more, but willgive you near unlimited expansion