I find electricity intriguing, but can’t wrap my head around it. I have this vague idea that electrons move along a wire. I get stuck think that it has to be a complete circuit.

What does it really mean when I open an outlet and there are 3 wires?

I think you need hot for the incoming and negative for the outgoing to complete the circuit.

So what does the neutral do?

And then adding ground into the mix and daisy chain addition outlets. Throw in a switch and not you have a single wire? Doesn’t electrons have to flow in the signal wire? Why is that not a complete circuit?

  • clockwork_octopus@lemmy.worldEnglish
    3·
    1 year ago

    Ok. So, first off, there are two kinds of power, AC (alternating current, which is the kind found in your house or that is provided by a generator) and DC (direct current, ie. provided by a battery).

    AC has a hot, neutral, and a ground wire.

    DC has a positive and a negative.

    Regardless of whether AC or DC power is used, circuits work only when they’re closed. If the circuit is interrupted anywhere along that closed loop, current will no longer flow. A switch works by opening a circuit. So, when the light switch is closed, current flows from the house panel through the wires, through the light switch, and to the light bulb. When the switch is turned off, the circuit opens, and the light turns off. Or, when the button is pressed on a flashlight, the circuit is closed, and the light turns on.

    Now. As stated earlier, your North American AC outlet has a hot, a neutral, and a ground wire. The hot wire is the path of travel for the current. The neutral completes the circuit, and allows unused current a “way home” so to speak. The ground wire acts as a safety net, preventing shocks and damage to equipment.

    There’s WAY more to it, but that’s a decent start towards demystifying what the wires are, at least.

  • hawkwind@lemmy.managementEnglish
    12·
    1 year ago

    I think you should watch some YouTube on AC vs DC. I think when you say neutral, you mean ground (the bottom pin on the outlet.)

  • hawkwind@lemmy.managementEnglish
    12·
    1 year ago

    Hot and negative connect your light bulb’s electrons to the generator. The generator moves the electrons back and forth and that makes your light bulb glow. Ground is a place for electrons to go if there’s extra.