img

I know the max rated temperature for my GPU is 92°C, but that doesn’t mean it’s your target temperature!

  • bleistift2@feddit.deOP
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    5 months ago

    I don’t know of any modern paste that is electrically conductive

    I wasn’t trying to imply that. When I said “frying the chip” I meant through bad thermal coupling.

    contrary to the old belief, you can’t use too much.

    You’re the first person to suggest that, and frankly, I find that counterintuitive. Everything isolates if it’s thick enough. However I’ll also look into that someday and see if there’s something to it. Thanks again.

    • Betty_Boopie@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      5 months ago

      Your correct that thickness plays a role in theremal transfer, but the paste and amount you use is not what determines that gap. Both laptop and desktop heatsinks are under quite a bit of pressure, more than enough to squish out extra paste. If you want to be extra sure you can spread a thin layer across the entire chip, but a dot or two usually works just fine. This video is on desktop coolers but mounting pressure should be similar.

      If your laptop is over a couple years old I can almost guarantee there are dry spots on the chip currently. Laptops already run pretty hot and it’s a double whammy for drying and pump out.