I saw another faceter experimenting with frosting the edges between facets and the result was so intriguing I decided to copy the idea. It created such a cool snowflake effect in this aquamarine!

I finally have a gem that is showcased better as a still photo than a video. 🤯

5.94 cts, 10.78mm

Design (unfrosted) is Sparkle Six by Wayne Emery (can be found on the USFG website)

      • meggied90OP
        3·
        7 months ago

        You’re question has seriously amazing timing. Two weeks ago I would have answered you with “several thousand dollars” because the machines that were on the market are all very expensive.

        However, last week a passionate faceter came up with an economic solution for those who don’t have thousands to throw at a fancy machine. By modifying an unusable machine from Amazon, you can make it a viable option for faceting and it costs about $500. It will be without bells and whistles but it’s perfectly usable.

        https://store.turtleshoard.com/pages/cutkit-one-get-started-faceting-for-under-500

        The only other thing you would need to budget for is your rough, and that’s only expensive if you want it to be. If you have local metaphysical shops near you, they often sell quartz pebbles for like $5 and I faceted several of those as my first stones. 😉

        Of course, if you want to try before you buy you could look for a local lapidary club or gem and mineral society in your city - send them an email and ask if they know anyone who teaches faceting. I did this and I was very happy to have the experience!