• Churbleyimyam
    link
    fedilink
    arrow-up
    5
    ·
    9 months ago

    The type of sail you’re referring to is ‘bermuda-rigged’, like the smaller ones at the front of the boat in the picture. The big ones in the middle of the picture are ‘square-rigged’ which are really only good for sailing downwind.

    • merc@sh.itjust.works
      link
      fedilink
      arrow-up
      1
      ·
      9 months ago

      I think the square rigged sails could be rotated, so you could sail with a cross wind. You would just have a fair amount of trouble sailing upwind.

      • Churbleyimyam
        link
        fedilink
        arrow-up
        1
        ·
        9 months ago

        Maybe, although I haven’t seen anyone doing it. I’m guessing you would need a sheet to each corner to trim the sail tightly enough which I think would be too much of a headache for the crew. Worth thinking about tho, especially in a castaway situation!

        • merc@sh.itjust.works
          link
          fedilink
          arrow-up
          1
          ·
          9 months ago

          To clarify, it’s not that the square rigged sails themselves can be used to sail upwind. I was talking about how you could rotate the yard so that the sails could continue to catch a wind. But, for sailing upwind, the square rigged sails wouldn’t help much. It’s that square rigged sailing ships had staysails which would let them sail upwind slightly. Apparently a fore-and-aft rigged sailing ship can sail within 20 degrees to the wind, while a square rigged ship could only do about 60 degrees.

          In a castaway situation, I wonder what the best idea would be. Try an experimental modification of an existing sail to give you better mobility? Or be thankful you have a working sail and accept limitations on how much you can steer? Ignoring the sails though, my guess is that in a shipwreck, one of the most likely to be damaged things will be the keel, and trying to sail without a good keel would suck.