I’m looking for a way to cover the cameras when I’m not using them. So far the best thing I can think of is a case with sliding covers on it but I don’t know if that even exists. Stickers might also be a good solution.

  • Firipu@startrek.websiteEnglish
    9·
    1 year ago

    Tbh, if you’re that paranoia about your phone, to the extent that you don’t trust grapheneOS… Go back to a dumbphone… The stuff you actually do on your phone (eg using anything on the internet through your provider/ISP) is probably 100x “riskier” than the insane offchance that some three letter agency is “hacking” your phone…

  • random65837@lemmy.worldEnglish
    113·
    1 year ago

    The solution since you have a Pixel is GrapheneOS. If you don’t trust your OS and permissions to not fire up your camera when you’re not the one doing it, than you shouldnt be running it.

      • random65837@lemmy.worldEnglish
        92·
        1 year ago

        Theres no reason not too, its open source, you can verify its not doing anything in the background that its not supposed to be. Unless you’re literally the 0.0000000001% you don’t have a threat model that justifies that level of paranoia, but even if you did, that’s literally who Graphene was made for.

        Its signed and verified boot is intact, its not getting fucked with after the fact. Even if you used a shady app, its powerless against your permissions and camera toggle.

        • nodsocket@lemmy.worldOPEnglish
          211·
          1 year ago

          GrapheneOS could run inside of a hypervisor which is controlled by malicious actors. This is a possibility because I have no idea what happened to the device hardware before I obtained it. Thus the cameras can’t be fully trusted.

          • random65837@lemmy.worldEnglish
            61·
            1 year ago

            Wrong, aside from the fact you should have been the one to install Graphene, even if it came preinstalled, the first thing you should have done was wiped and reinstalled. Secondly, running a HV on Android aside from it being very hard to due, and making the phone run like complete shit which you’d 100% notice in usability and battery like, would require root access, which would mean failing verified boot AND leaving the bootloader unlocked. Then on top of that, there’s the fact Graphene can audit itself to verify everything is OK, while that move does require a 2nd GrapheneOS device, it’s completely unneeded because of all the other things above that.

            You’re being totally paranoid man. You’re not Edward Snowden. There’s no 3 letter agencies after you, no “malicious actors”. You’re not going to get better than GrapheneOS if you want to carry a smartphone, not a useable one at least. Grapehene has proven itself, EVEN as far as Snowden is concerned!

  • Zehoboking@lemmy.worldEnglish
    3·
    1 year ago

    In addition to sliding cases for the back camera, there are also sticker slider add-ons for the front facing as well. You’ll have to search based on your specific model, but be careful of the front facing sticker so they don’t block the ambient light sensor on your device.

  • Cocodapuf@lemmy.worldEnglish
    2·
    1 year ago

    The solution you’re looking for is called “black electrical tape”.

    It’s simple, easy to use, comes off easy, and can be found at any hardware store.

  • atrielienz@lemmy.worldEnglish
    1·
    1 year ago

    For the front facing camera you can buy stickers or a little stick on shutter that you can flip open and closed. You could maybe do the same with the back but that may involve covering the flash as well.

    ZUCUCUC Laptop Camera Cover Slide, Phone 6 Pack Ultra Thin Webcam Slide for Laptop, Desktop, PC, Tablet, Smartphone, Protect Your Privacy and Security(Black) https://a.co/d/4cYj4U4

  • Jimmycakes@lemmy.worldEnglish
    44·
    1 year ago

    You could remove the glass over the lenses and physically break the cameras then put the glass back on